Disertační práce se zabývá řešením nových přístupů při návrhu polovodivých ochran(dále EGS ochran) u vysokonapěťových točivých strojů.
Tyto ochrany jsou aplikovány na statorové tyče v oblasti výstupu z čel generátoru a jsou elektricky namáhány jak při provozu stroje, tak hlavně při mezioperačních zkouškách v průběhu výroby stroje. Namáhání lze snížit optimálním navržením EGS ochrany.
Cílem této práce je najít řešení pro návrh způsobu aplikace EGS ochran, které by dokázaly ideálně rozložit elektrické pole, aby nedocházelo ke vzniku částečných výbojů při provozu stroje při jmenovitém napětí nebo k destrukci celé ochrany v průběhu mezioperačních zkoušek při zkušebním napětí. V práci se řeší také možnost použití nových laků založených na organických polymerech.
Anotace v angličtině
The dissertation deals with the new approaches in the design of semiconductive protection (the EGS protection) in high-voltage rotating machines.
These protections are applied to the stator bars in the end-winding of the generator and are electrically stressed during the machine operation, especially within testing during manufacture of the machine. The stress can be reduced by designing the optimal EGS protection.
The aim of this work is to find a method for designing the application of EGS protection, which would be able to ideally distribute the electric field to avoid the occurrence of partial discharge when operating at rated voltage or the destruction of the entire protection during testing at the test voltage. The work also deals with the possibility of using new varnishes based on organic polymers.
Disertační práce se zabývá řešením nových přístupů při návrhu polovodivých ochran(dále EGS ochran) u vysokonapěťových točivých strojů.
Tyto ochrany jsou aplikovány na statorové tyče v oblasti výstupu z čel generátoru a jsou elektricky namáhány jak při provozu stroje, tak hlavně při mezioperačních zkouškách v průběhu výroby stroje. Namáhání lze snížit optimálním navržením EGS ochrany.
Cílem této práce je najít řešení pro návrh způsobu aplikace EGS ochran, které by dokázaly ideálně rozložit elektrické pole, aby nedocházelo ke vzniku částečných výbojů při provozu stroje při jmenovitém napětí nebo k destrukci celé ochrany v průběhu mezioperačních zkoušek při zkušebním napětí. V práci se řeší také možnost použití nových laků založených na organických polymerech.
Anotace v angličtině
The dissertation deals with the new approaches in the design of semiconductive protection (the EGS protection) in high-voltage rotating machines.
These protections are applied to the stator bars in the end-winding of the generator and are electrically stressed during the machine operation, especially within testing during manufacture of the machine. The stress can be reduced by designing the optimal EGS protection.
The aim of this work is to find a method for designing the application of EGS protection, which would be able to ideally distribute the electric field to avoid the occurrence of partial discharge when operating at rated voltage or the destruction of the entire protection during testing at the test voltage. The work also deals with the possibility of using new varnishes based on organic polymers.