Tato disertační práce vychází se současných požadavků na rychlost a
efektivitu procesů z pohledu digitálního podniku a facility managementu. Cílem
bylo vytvořit nástroje pro sběr, správu a distribuci prostorových informací a
připojených metadat.
Literární rešerše se v úvodu se zaměřila na současné existující systémy.
V souladu s ustálenou praxí je informační zajištění podniku pro účely této práce
členěno na proces získávání a proces správy dat v na sebe navazujících
postupech. Navržené kroky ukazují, jak integrovat metadata a prostor se snahou
odstranit slabá místa stávajících řešení.
Experimentální a vývojový program byl rozdělen do čtyř základních
procesů. Získání prostorových dat, identifikace a správa metadat, propojení
metadat a prostorových informací a optimalizace dat pro distribuci. Pro získání
prostorových dat je vyvinuto experimentální zařízení - 3D skener umožňující
základní mapování a tvorbu objektů s navazujícím procesem zpracování
prostorových dat. Paralelně je řešena identifikace a správa metadat ve struktuře
umožňující vysoký stupeň integrace podnikových informačních systémů. Tyto dva
procesy jsou propojeny ve třetí části pomocí integračního mostu - formátu VRML
umožňujícího procházení virtuálních (skenovaných) světů a napojení na systém
metat. Čtvrtá část se zabývá rozkladem virtuální scény na jednotlivé objekty,
tvorbou knihoven objektů a LOD optimalizací umožňující snížit objem datových
toků při distribuci koncovým uživatelům.
Všechny navržené procesy a technologie jsou nezávislé na konkrétním SW,
využívají převážně otevřené, dostupné technologie a umožňují tak nasazení
v malých a středních podnicích bez vytváření závislosti na dodavatelích HW a SW.
Anotace v angličtině
This thesis is based on the current requirements for speed and efficiency of
processes, from the point of view of digital enterprises and facility management.
The aim was to create tools for managing the capture and distribution of spatial
information and associated metadata.
The literature review at the beginning of the thesis focuses on the currently
existing systems. The process of acquiring and managing data is divided into
individual steps in accordance with the standard practice. The proposed steps
demonstrate how to integrate metadata and spatial information to correct the weak
points of current solutions.
The experimental and development program was divided into four basic
steps: capturing spatial data, metadata identification and management, linking
metadata and spatial information and reduction of spatial data to facilitate
communication. An experimental device was developed to obtain the spatial data -
a 3D scanner that allows basic mapping and data representation of objects
followed by processing the spatial data. A structure to identify and manage
metadata is proposed that supports a high degree of integration of enterprise
information systems. These two processes are linked in the third part using the
integration bridge ? VRML format enables users to browse the virtual (scanned),
world system and connect to the metadata structure. The fourth part deals with the
decomposition of the virtual scene into individual objects, creation of libraries of
objects and with optimized LOD reduction in the distribution of data to end users.
All the proposed processes and technologies are independent of specific
software products and use widely available equipment, thus making their use in
small and medium enterprises feasible and avoiding vendor lock-in.
Klíčová slova
Klíčová slova: laserscanning, mesh, digitální podnik, sběr informací,
identifikace objektů, segmentce sítí, VRML, popis objektů, integrovaný
systém podnikových informačních systémů.
Klíčová slova v angličtině
Keywords: laser scanning, mesh, digital enterprise, collecting information,
object identification, mesh segmentation, VRML, object description,
integrated company information systems.
Rozsah průvodní práce
x
Jazyk
CZ
Anotace
Tato disertační práce vychází se současných požadavků na rychlost a
efektivitu procesů z pohledu digitálního podniku a facility managementu. Cílem
bylo vytvořit nástroje pro sběr, správu a distribuci prostorových informací a
připojených metadat.
Literární rešerše se v úvodu se zaměřila na současné existující systémy.
V souladu s ustálenou praxí je informační zajištění podniku pro účely této práce
členěno na proces získávání a proces správy dat v na sebe navazujících
postupech. Navržené kroky ukazují, jak integrovat metadata a prostor se snahou
odstranit slabá místa stávajících řešení.
Experimentální a vývojový program byl rozdělen do čtyř základních
procesů. Získání prostorových dat, identifikace a správa metadat, propojení
metadat a prostorových informací a optimalizace dat pro distribuci. Pro získání
prostorových dat je vyvinuto experimentální zařízení - 3D skener umožňující
základní mapování a tvorbu objektů s navazujícím procesem zpracování
prostorových dat. Paralelně je řešena identifikace a správa metadat ve struktuře
umožňující vysoký stupeň integrace podnikových informačních systémů. Tyto dva
procesy jsou propojeny ve třetí části pomocí integračního mostu - formátu VRML
umožňujícího procházení virtuálních (skenovaných) světů a napojení na systém
metat. Čtvrtá část se zabývá rozkladem virtuální scény na jednotlivé objekty,
tvorbou knihoven objektů a LOD optimalizací umožňující snížit objem datových
toků při distribuci koncovým uživatelům.
Všechny navržené procesy a technologie jsou nezávislé na konkrétním SW,
využívají převážně otevřené, dostupné technologie a umožňují tak nasazení
v malých a středních podnicích bez vytváření závislosti na dodavatelích HW a SW.
Anotace v angličtině
This thesis is based on the current requirements for speed and efficiency of
processes, from the point of view of digital enterprises and facility management.
The aim was to create tools for managing the capture and distribution of spatial
information and associated metadata.
The literature review at the beginning of the thesis focuses on the currently
existing systems. The process of acquiring and managing data is divided into
individual steps in accordance with the standard practice. The proposed steps
demonstrate how to integrate metadata and spatial information to correct the weak
points of current solutions.
The experimental and development program was divided into four basic
steps: capturing spatial data, metadata identification and management, linking
metadata and spatial information and reduction of spatial data to facilitate
communication. An experimental device was developed to obtain the spatial data -
a 3D scanner that allows basic mapping and data representation of objects
followed by processing the spatial data. A structure to identify and manage
metadata is proposed that supports a high degree of integration of enterprise
information systems. These two processes are linked in the third part using the
integration bridge ? VRML format enables users to browse the virtual (scanned),
world system and connect to the metadata structure. The fourth part deals with the
decomposition of the virtual scene into individual objects, creation of libraries of
objects and with optimized LOD reduction in the distribution of data to end users.
All the proposed processes and technologies are independent of specific
software products and use widely available equipment, thus making their use in
small and medium enterprises feasible and avoiding vendor lock-in.
Klíčová slova
Klíčová slova: laserscanning, mesh, digitální podnik, sběr informací,
identifikace objektů, segmentce sítí, VRML, popis objektů, integrovaný
systém podnikových informačních systémů.
Klíčová slova v angličtině
Keywords: laser scanning, mesh, digital enterprise, collecting information,
object identification, mesh segmentation, VRML, object description,
integrated company information systems.